A nylon sound guitar for electric guitar players.

I want to incorporate the nylon sound with a casual approach. I want a nylon guitar that I can play without feeling too different from a regular electric guitar. And it's a fun instrument that can be used not only on stage but also as a living room guitar.

The Ibanez FRH10N was developed with these concepts in mind, and is essentially a nylon electric guitar.

The natural nylon string sound that envelops the player when played on an acoustic, and the distorted nylon sound that lets you feel a new era when plugged in, will add a new page to your playing experience. It will be given to you.

-FR shape hollow body equipped with side ports (side holes) (w/fan bracing)

Based on the single-cut Ibanez original FR shape, the body is approximately 50mm thick and has a hollow structure with fan bracing on the top (upper shell), which is common in classical guitars. There is no sound hole on the front side of the body, but there is a sound port on the side of the body facing the player.

It's designed to be as comfortable as an electric guitar, and to make it easy to experience the natural nylon sound.

-46mm width nut/400mmR fingerboard

The nut width is between that of a typical classical guitar and an electric guitar, and the fingerboard has a radius of 400 mm.

Intended for use by electric guitar players, the specs were designed to set it apart from classical guitars in order to achieve smooth fingering.

In addition, this instrument, which opens up a new category of nylon electric guitars, has a slightly lower string height setting than typical classical guitars, which do not shy away from buzzing sounds.

-Ibanez T-bar undersaddle pickup

The pickup is an original piezo pickup that is resistant to noise and outputs a wide range of natural sounds.

-Ibanez Custom Electronics Preamplifier

This is a preamplifier with an integrated end pin. Equipped with a mute switch that can mute the sound with one push.

(powered by CR2032x2)

- Sitka spruce veneer body TOP, sapele body SIDES & BACK

-Walnut fingerboard & bridge

-D'Addario XTC45 strings (.028/.032/.040/.028W/.035W/.044W)

*The image is a sample.

Body Shape: FRH body

Top: Solid Sitka Spruce top

Back & Sides: Sapele back & sides

Bracing: Fan Bracing for FRH

Neck: C Shape / Nyatoh set-in neck

Fretboard: Walnut fretboard

Bridge: Walnut bridge

Inlay: White dot inlay

Tuning Machine: Gold Classical tuners

Nut Material: Bone nut

Saddle Material: Bone saddle

Pickup: Ibanez T-bar undersaddle pickup

Preamp: Ibanez Custom Electronics

Outputjack: 1/4 Output

Neck Dimensions

Scale: 648mm

Width: 46mm at NUT

Width: 58mm at 14F

Thickness: 21mm at 1F

Thickness: 22mm at 7F

Radius: 400mmR

Soft case included

*The image is a sample, so the wood grain and color may vary from piece to piece.