TAMA tension lock. Attached to the square head of the tension bolt to prevent the tension bolt from loosening.

■TENSION LOCK

■10 pieces

■"Tension Lock TTL10" is an accessory that prevents tension bolts from loosening. Attached to the square head of the tension bolt, the "tension lock" and the hoop are attached to prevent the tension bolt from loosening.

It is characterized by its high durability due to the O-ring.

■The "tension lock" can be attached by fitting the square head of the tension bolt into the eight grooves on the mounting port. Fitting the "tension lock" into the groove of the "tension lock" according to the shape and size of the square head prevents loosening and rotation.

In addition, the O-ring and the groove of the "tension lock" mounting port act as a ratchet mechanism, making it possible to turn the tuning key even with the "tension lock" attached. Fine adjustments can be made without removing the "tension lock" every time you tune.
■The O-ring attached to the "tension lock" is made of a rubber-like elastic material and is designed to tighten the "tension lock" and tension bolt. Not only does it increase the durability of the attachment port against deformation and wear caused by attachment and detachment, but it also prevents the "tension bolt" from falling off even when attached to the back of the head.
■Can be used with hoops and tension bolts from almost all manufacturers.
*When using, make sure one side of the "tension lock" is in close contact with the hoop as shown in the photo.
*Cannot be used with TAMA Starphonic snare drums, TAMA concert snare drums (14" diameter models), or wood hoops.